Wacker Neuson CRT 48-31V Instrukcja Operatora Pobierz pdf (Strona 35)

CRT 48 Maintenance

wc_tx000642gb.fm 35

5.7 Blade Arm Adjustment

To eliminate wobble:

5.7.1 Pitch the blades flat.

5.7.2 Tighten lock nut located at the bottom of each pitch cable. Maximum

cable play should be no more than 3.18 mm (.125 in.) or the width of

the cable.

5.7.3 Set gap on all adjustable links to 4.58 mm (.180 in.).

5.8 Mounting Float Pans

See Graphic: wc_gr000275

Certain applications may require the use of float pans. Optional float

pans (a) are available, and are used with the machines in the non-

overlapping configuration only.

To mount float pans:

Lift trowel off the ground with the engine off and position the pan

against the blades. Turn pan either to the right or left to engage clip

angles (b) as shown. Remember, the right-hand trowel blades turn

counterclockwise; the left-hand blades turn clockwise.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 75 76

Brak uwag

Wacker Neuson CRT 48-31V Instrukcja Operatora Strona 35