Wacker Neuson GPSi 3200 Instrukcja Operatora Pobierz pdf (Strona 27)

GPi 3200 / 4300 Operation

wc_tx001875gb.fm 27

Engine switch

(h)

The engine switch (h) controls the function of the choke and the fuel valve. There

are three positions:

LCD (j)

The LCD (j) displays machine operating status such as voltage, frequency, and

operating hours. The LCD also displays O_Lod when the generator is in an

overload condition.

LCD

changeover

switch (n)

and indicator

lights

The green LCD changeover switch (n) allows the operator to cycle through the

various machine status modes described above.

 Operating hours are displayed when the machine starts. The red operator hour

indicator light (k) illuminates.

 Pressing the LCD changeover switch after starting changes the LCD display to

voltage. The red voltage indicator light (l) illuminates.

 Pressing the LCD changeover swiitch a second time changes the LCD display

to frequency. The red frequency indicator light (m) illuminates.

 Pressing the LCD changeover switch a third time changes the LCD display back

to operating hours. The red operator hour indicator light (k) illuminates.

Auto-power

saving switch

(o) and

indicator light

When pressed, the red auto-power saving switch (o) activates the auto-power

saving function. The green auto-power saving indicator light (p) illuminates.

Engine oil

level warning

indicator light

(q)

When the engine oil level falls below the specified operating level, the indicator

light (q) illuminates and the engine stops. The oil level is detected by an internal oil

sensor.

AC circuit

breakers (r)

An AC circuit breaker (r) shuts off the electrical current when the current exceeds

its limit, or a malfunction occurs in a piece of equipment connected to the

generator.

 An AC circuit breaker has activated when the toggle switch moves to the OFF

position.

 To reset an AC circuit breaker, move the toggle switch to the ON position.

Ground-Fault

Circuit

Interrupter

(GFCI) (s)

The GFCI cuts power to the receptacles when a ground fault occurs to a piece of

equipment attached to the generator. See topic Customer Connections for

operating information.

Symbol Meaning Description

Choke valve is

closed

Turn the switch to this position when starting a cold

engine.

Normal operating

position

Turn the switch to this position after the engine starts.

Note: A warm engine can be started with the switch in

this position.

Fuel valve is

closed

Turn the switch to this position to stop the engine.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag

Wacker Neuson GPSi 3200 Instrukcja Operatora Strona 27

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Generatory prądu Wacker Neuson GPSi 3200