Wacker Neuson BTS 635s Instrukcja Operatora Strona 33
- Strona / 80
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
BTS 630, 635 6 Components and operator's controls
Operator's manual 33
Water supply
You can connect a water supply unit to the water supply connection.
The water supply performs the following functions:
Cools the cutting blade evenly.
Causes dust particles to stick together.
Multifunction switch
You can switch the machine on and off with the multifunction switch.
The multifunction switch has a choke setting for cold starts.
Throttle lever lock
Unintentional pressing of the throttle lever is prevented by the throttle lever lock.
You can only press the throttle lever if you are pressing the throttle lever lock at
the same time.
If you release the throttle lever, the throttle lever lock also returns to its original
position.
Throttle lever
The machine speed can be continuously varied using the throttle lever.
Lock button
The lock button can lock the throttle lever in the half-gas position.
Recoil starter
The recoil starter starts the engine.
Protective hood
The protective hood performs the following functions:
Protects the operator from the rotating cutting blade.
Diverts workpiece particles and sparks or chips from a damaged cutting
blade away from the operator.
Set the protective hood for operation such that workpiece particles are diverted
away from the operator.
Decompression valve
When starting the engine, the decompression valve allows some of the
compressed air to escape from the cylinder. The lower compression in the
cylinder reduces the drag on the starter rope.
When the engine is running, the decompression valve returns to its original
position.
- Operator's manual 1
- Gasoline cut-off saw 1
- 630, 635, 635s 1
- BTS 630, 635 3
- Operator's manual 3 3
- 4 Operator's manual 4
- 1Foreword 5
- 2 Introduction 6
- 2.3 Described machine types 7
- 3.1 Principle 9
- 3.3 Protective gear 13
- 3.4 Transport 14
- 3.5 Operating safety 15
- Before breaks 16
- 3.9 Maintenance 24
- 26 Operator's manual 26
- 3 Safety BTS 630, 635 26
- BTS 630, 635 3 Safety 27
- Operator's manual 27 27
- 28 Operator's manual 28
- 3.12 Safety devices 29
- 4 Scope of delivery 30
- 5 Structure and function 31
- 32 Operator's manual 32
- 7 Transport 35
- 8 Initial start up 36
- 2 Adjusting screw 4 38
- 40 Operator's manual 40
- 9 Use and operation 41
- 1Bore 4Thrust washer 42
- 2Spindle 5Screw 42
- 3 Cutting blade 42
- 9.2 Starting up 43
- 2 Throttle lever 4 44
- 1 Starter rope 3 Rear handle 45
- 2 Front handle 45
- 9.3 Operating the machine 47
- 9.4 Decommissioning 48
- 10 Maintenance 49
- 10.2 Maintenance schedule 50
- 10.3 Maintenance work 51
- Item Designation 52
- 1 Fuel cap 52
- 2 Adjusting screw 53
- 1 Thrust washer (2 pieces) 54
- 2 Cutting blade 54
- 1 Air cleaner cap 57
- 2 Spark plug cap 57
- 1 Spark plug air gap 58
- 2Isolator 58
- 3 Belt guard 59
- 1 Cutting attachment 60
- 2 V-belt 60
- 1 Fuel filter 3 Retainer 62
- 2 Fuel cap 62
- 1 Adjusting screw 63
- 1 Muffler 3 Guide plate 64
- 1 Seal 3 Screw (4 pieces) 65
- 2 Muffler 65
- 11 Troubleshooting 67
- 12 Accessories 68
- 13 Storage 69
- 14 Technical data 70
- Operator's manual 71 71
- Drive engine 71
- 14.2 Fuel mixture table 72
- 15 Emission control warranty 73
- 76 Operator´s manual 76
- EC Declaration of Conformity 77
Powiązane produkty i podręczniki dla Silnik Wacker Neuson BTS 635s
Silnik Wacker Neuson PDI 3 Instrukcja Operatora
(52 strony)
(52 strony)
Silnik Wacker Neuson CRT 48-31V Instrukcja Naprawy
(104 strony)
(104 strony)
Silnik Wacker Neuson RD 27-100 Instrukcja Naprawy
(178 strony)
(178 strony)
Silnik Wacker Neuson WM 80 Instrukcja Naprawy
(136 strony)
(136 strony)
Salamander-designs Synergy System SLH10C/B manuels
Manuels d'utilisation et guides de l'utilisateur pour Meubles Salamander-designs Synergy System SLH10C/B.
Nous fournissons des manuels en pdf 1 Salamander-designs Synergy System SLH10C/B à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji